Extremely powerful rechargeable flashlight that can also be used as a powerbank with a capacity of 27200 mAh and a light output of maximum 9600 lumen.
PT80 User Manual
Patented Ultra Bright USB Rechargeable Flashlight
LED: 16 CREE XP-G2 S4 LEDs
Output & Runtime
ANSI/NEMA FL 1
Peak beam intensity (cd)
Max beam distance(m)
IPX8 (under water 2meters)
Length: 192mm/ 7.56in
Head diameter: 75mm/ 2.95in
Body diameter: 52mm/ 2.05in
Battery pack weight: 393g/ 13.86oz
NOTICE: The above-mentioned parameters are approximate and may vary between flashlights, batteries and environments.
This is a high-performance light and generates significant heat in Turbo mode. To protect the light and user, output in Turbo will drop to 70% of maximum brightness after 3 minutes. Output will also be adjusted by real time temperature monitoring
Carefully unscrew and remove the light’s head, and connect USB charging cable(s) as shown in the diagram below, a combination of the 3 micro USB ports may be
Charging time: 5V/ 1A
8 hours/ 1 cable
4 hours/ 2 cables
3 hours/ 3 cables
Charging time: 5V/ 2A
6 hours/ 1 cable
3 hours/ 2 cables
The auto testing circuitry controls the battery pack charging from 500mA to 3A inputs over three Micro USB ports.
When charging, the white circle indicator turns red; when fully charged, it will go out
During charging, the battery capacity will be displayed as four stages on the green indicator;
1 bar indicates 25% capacity; 2 bars indicates 50%; 3 bars indicates 75%; 4 bars is 100% capacity. Battery level may also be checked at any time by pressing
the "push" button, the indicator will turn off after 6 seconds.
Power Bank output
The standard USB socket can be used as a power bank. Connect a USB lead to your device and press "push" to start charging. Output will stop after 10 seconds if there is no load
Theme by InStijl Media